PRODUCTION OF DECORATIVE BRICKS
SUBSTANTIAL BENEFITS OF DECORATIVE BRICKS
PLINTHONTECOR decorative bricks not only give new aesthetics to the walls with the beauty of the 8 colors and the harmony of the shapes, but also a series of noteworthy qualities.
1) They cancel the building of the second outer brick, with the consequence that...
2) Remove coatings (plasters, paints, etc.).
3) They eliminate the need for facade maintenance and repair.
4) The overwhelmingly superior strength of brick compared to plaster or paint is also a major advantage.
5) PLINTHONTECOR decorative bricks are completely waterproof and completely protect against moisture.
6) They do not remove unsightly bleaching salts. They thus become the most suitable for seaside constructions, hotels, bungalows, etc.
7) Their dimensions are also completely isometric, which allows for quick construction with a perfect final aesthetic result.
8) The dimension 20x4.5x6.5 can also be used for thermal facade.
DIMENSIONS AND COLORS OF DECORATIVE BRICKS
Dimensions: A) 20x9.5x6.5 (whole decorative bricks) B) 20x4.5x6.5 (half decorative bricks)
Colors: 1) Two-tone, 2) Orange, 3) Red, 4)Grey-white, 5) Grey, 6) White, 7) Brown, 8) Yellow
In addition to the basic colors and in case of a large order, decorative bricks are also manufactured in any color of your choice.
SAFETY PACKAGING AND CONSTRUCTION OF DECORATIVE BRICKS
PLINTHONTECOR industry delivers the decorative bricks in a wooden pallet package which contains 500 pieces which correspond to a 7.7m² construction. The packaging ensures absolute and quick control during delivery. In addition, it eliminates transport damage. 65 bricks are built in one square building meter.
Note: PLINTHODECOR bricks, for the above reasons, are built up to the last one.
BQV certifies that the organization: IOANNIS BILIAS-GEOGIOS THOMAIDIS O.E. with d.t. PLINTHONTECOR has developed and implements a Management System that meets the requirements of the Standard: ELON EN ISO 9001:2015.
SPECIFICATIONS OF DECORATIVE BRICKS
| 1.COMPRESSION STRENGTH TEST OF DECORATIVE BRICKS(ASTM C67/78) | |||
| A/A |
Essay Dimensions (cm) |
Charging Surface (cm) |
Compressive resistance (Mpa) |
| 1 | 20,1*9,4*6,5 | 188,94 | 162,4 |
| 2 | 20,1*9,4*6,5 | 188,94 | 168,9 |
| 3 | 20,1*9,5*6,5 | 190,95 | 166,7 |
| 4 | 20,1*9,5*6,5 | 190,95 | 165,8 |
| 5 | 20,1*9,6*6,5 | 192,96 | 163,2 |
| 6 | 20,1*9,4*6,5 | 188,94 | 164,7 |
| 2.WATER ABSORPTION CONTROL OF DECORATIVE BRICKS(ASTM C67/78) | |||
| Α/Α |
Initial Dry Weight (gr) |
Weight after 24h immersion (gr) |
Water absorption % |
| 1 | 2096,2 | 2142,1 | 2,19 |
| 2 | 2078,4 | 2122,3 | 2,11 |
| 3 | 2090,2 | 2116,6 | 1,26 |
| 4 | 2103,1 | 2151,1 | 2,28 |
| 5 | 2095,8 | 2130,.4 | 1,65 |
| 6 | 2076,4 | 2094,3 | 0,72 |
3. BOILING TEST OF DECORATIVE BRICKS
After 24 hours of boiling, none of the samples of decorative bricks showed any cracks or limescale.
4. TEST FOR FREEZING RESISTANCE OF DECORATIVE BRICKS (ASTM C67/78)
The freeze-thaw test was done in five cycles with the following schedule: Keeping three samples of decorative bricks for 20 hours at a temperature of -18°C and thawing in water at ambient temperature for 4 hours. After the trial no change was observed in the samples of decorative bricks .
